Loading... Please wait...

AX2401 EVA Hot Melt Adhesive

RRP:
$120.00
Your Price:
$98.99 (You save $21.01)
SKU:
AX2401
Weight:
33.00 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

Application:
Ideal for high speed packaging lines; tray forming, box closing, wrap around and similar applications.

Characteristics/Directions for use:
Low viscosity hot melt that is fast setting with good color and heat stability in the melt. All raw materials used in the manufacturing of Axco’s AX2401 are approved according to FDA guidelines 175.105 for food packaging.

Processing Temp.: 149-177°C (300-350°F)
Open Time: 5-6 seconds
Setting Time: approx. 1 second

Tested according to factory test methods. Customer trials are recommended.

Technical Data:
Density [g/cm³]: approx. 0.95 (8.0 lbs./gal)
Softening point: approx. 110°C (230°F) Ring & Ball
Appearance: yellow - opaque

chart.jpg

Cleaning: Carefully clean while hot by scraping with a spatula.

Storage: May be stored in properly closed original containers, cool and dry (15-25°C (59-77°F)).

Best before date, please refer to label on the packaging unit.

Packaging: In cartons of 33 lbs. net.

Remarks:
For further information concerning handling, transport and disposal, please refer to the Material Safety Data Sheet. Our information on this data sheet is based on test results from our laboratories as well as on experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding for us. The information given in this leaflet represents neither a performance guarantee nor a guarantee of properties, nature, condition, state or quality. No liability may be derived from these indications nor from the recommendations made by our free technical advisory service.


Find Similar Products by Category


Add to Wish List

Click the button below to add the AX2401 EVA Hot Melt Adhesive to your wish list.

You Recently Viewed...