The Axco "Basic" Hot Roll uses the same roll and reservoir as the full-feature Hot Roll.  The difference is the drive and termperature control package.  The basic machine, available in 6" and 12" roll lengths.

The control panel is simple and straightforward, featuring an illuminated main power switch, a motor start-stop switch, and a knob to set the temperature.  As with all Axco roll coaters, there is an electronic under-temperature circuit to prevent the morot from attempting to run ntil the unit has achieved set point temperature.

The Basic Roll is easy to use and easy to own. Simply plug it into almost any 120 volt outlet, set the temperature, and turn it on. When it's up to temperature, the motor is enabled, and you are ready to make production. 

Features:

- 2 1/2 inch diameter rolls
- Fenwell electronic analog termperature control
- Brother International GTR gear motor
- Constant Speed AC Drive (approx 20 ft/min)
- Under temperature protection 

Specifications:

Product Weight (unpackaged):
6”: 40 lbs. (18 kilo)
12”: 50 lbs. (22 kilo)

Wattages/Voltage:
6”: 750 watt / 120V
12”: 1500 watt / 120V

Dimensions:
6”: 18"x12"x8" (46x30x20 cm.)
12”: 30”x12”x8” (60x30x20 cm.)

Reservoir Volume:
6”: 82 cu. in. (208 cu. cm.)
12”: 165 cu. in. (419 cu. cm.)

Roll Speed: 0-40 surface ft. per min. (0-12 meters per min.)

Temperature range: Ambient- 300 F (232 C)

Power supply: All Basic Rolls are 120V.

Additional Keywords: Hot Melt Wheelcoater, Wheelcoater, Hysol Wheelcoater, Surebonder Wheelcoater