Loading... Please wait...

AX2402 PO Hot Melt Adhesive

Your Price:
$98.99 (You save $21.01)
33.00 LBS
Calculated at checkout

Product Description

Ideal for closing folding boxes and cartons and tray forming.

Characteristics/Directions for use: 

Low viscosity hot melt with high hot tack, long open time, excellent color and heat resistance. Excellent mileage due to very low density. Good adhesion to difficult and coated substrates. Very good adhesion for bonds exposed to high storage temperatures. All raw materials used in the manufacturing of Axco’s AX2402 are approved according to FDA guidelines 175.105 for food packaging.

Processing Temp.: 160-180°C (320-356°F)
Open Time: 11-14 seconds
Setting Time: approx. 1 second

Tested according to factory test methods. Customer trials are recommended.

Technical Data:
Density [g/cm³]: approx. 0.87
Softening point: approx. 120°C (248°F) Ring & Ball
Appearance: colorless


Cleaning: Carefully clean while hot by scraping with a spatula.

Storage: May be stored in properly closed original containers, cool and dry (15-25°C (59-77°F)).

Best before date, please refer to label on the packaging unit.

Packaging: The unit size will be indicated upon request.

For further information concerning handling, transport and disposal, please refer to the Material Safety Data Sheet. Our information on this data sheet is based on test results from our laboratories as well as on experience gained in the field by our customers. It can, however, not cover all parameters for each specific application and is therefore not binding for us. The information given in this leaflet represents neither a performance guarantee nor a guarantee of properties, nature, condition, state or quality. No liability may be derived from these indications nor from the recommendations made by our free technical advisory service.

Find Similar Products by Category

Add to Wish List

Click the button below to add the AX2402 PO Hot Melt Adhesive to your wish list.

You Recently Viewed...